Carpet Installation Cost: What Shapes Your Quote
The cost to install carpet depends on the cushion, the old carpet, any stairs and how the room is prepared. Here is what the Carpet and Rug Institute and Mohawk require.
Mr. Wright Flooring · Nov 18, 2026

The cost to install carpet depends on more than the carpet you pick. The cushion underneath, the old carpet coming out, any stairs, and how the room is prepared all change the scope of the job. Instead of publishing per-square-foot prices, Mr. Wright Flooring gives you a free in-home measure and estimate for your rooms, and this guide explains what manufacturers and trade groups say shapes the job.
We're a family-owned flooring company in Jacksonville, serving Northeast Florida since 2012, and an authorized Mohawk retailer. This guide is part of our flooring cost guide, which covers carpet, LVP, laminate and tile. If you're still choosing a style, start with our guide to types of carpet, or browse our carpet options.
Why a carpet quote starts with a measurement
The Carpet and Rug Institute (CRI) publishes a standard for installing carpet in homes, CRI 105. Its 2019 edition says correct measurements and a detailed diagram are essential before an installation can be professionally planned, estimated or completed.
Our free in-home measure gives us your rooms' dimensions before we put together your estimate. If you'd like a rough square footage of your own first, our guide on how to measure for flooring walks you through it.
Cushion: the layer you don't see
CRI recommends carpet cushion, often called padding, under every carpet except direct glue-down, and it says to check the carpet manufacturer's cushion requirements.

CRI 105 makes that a requirement. The cushion has to conform to the carpet manufacturer's recommendations for the specific product being installed, and failing to follow them may void manufacturer warranties. In other words, the carpet you choose decides which cushion belongs under it.
The published numbers differ by source. CRI 105 says cushion for residential carpet should not exceed 7/16 inch. Mohawk's tufted carpet instructions call for cushion that meets FHA/HUD requirements, with a minimum density of 5 pounds per cubic foot and a thickness between 3/8 inch and 1/2 inch; for berber-style carpet, Mohawk recommends at least 8 pounds per cubic foot and 1/4 inch to 3/8 inch. Because CRI 105 defers to the carpet maker, go by the requirement for your specific carpet. Our carpet padding guide goes deeper.
Key takeaway
Your carpet's manufacturer sets the right cushion, and CRI 105 warns that the wrong one may void the manufacturer's warranty.
| Source | Cushion guidance |
|---|---|
| CRI (general) | Recommends cushion under every carpet except direct glue-down. |
| CRI 105 | Must conform to the carpet maker's recommendations; residential cushion should not exceed 7/16 inch. |
| Mohawk tufted carpet instructions | Meets FHA/HUD requirements; at least 5 pounds per cubic foot; 3/8 inch to 1/2 inch thick. |
| Mohawk, berber-style carpet | Recommends at least 8 pounds per cubic foot; 1/4 inch to 3/8 inch thick. |
Sources: Carpet and Rug Institute (CRI 105 and CRI guidance); Mohawk tufted carpet installation instructions
The old carpet, the furniture and the floor underneath
In most cases the old carpet comes out. CRI 105 says that, unless the manufacturer specifically recommends otherwise, carpet should not be installed over existing carpet.
CRI's advice for homeowners suggests settling a few questions before installation day: who moves the furniture, whether the company charges an extra moving fee if the installer does it, and who removes and disposes of the existing carpet and cushion. Ask those questions during your estimate so you know the answers ahead of time.
What's under the old carpet can matter too. Mohawk's tufted carpet instructions say asbestos-containing floor tiles, any adhesive that may contain asbestos, and other asbestos-containing floor coverings require special preparation, handling and removal procedures.
CRI 105 says most residential stretch-in carpet installations do not require moisture testing. Hard floors are different: Mohawk sets moisture limits for a concrete slab under its SolidTech vinyl and its laminated wood floors.
Key takeaway
Settle who moves the furniture and who hauls away the old carpet and cushion before installation day.
Stairs add their own steps
CRI 105 treats stairs as their own part of a carpet installation. It requires each stair tread, riser and nose to be clean, dry and structurally sound. Tack strip goes on each tread, and on waterfall-style stairs it goes on the risers too. CRI 105 adds that some stairs need tack strip along the sides to keep the carpet at the proper tension.

CRI does not attach time or cost to these steps.
Getting the room ready
Carpet needs the room at the right conditions before it goes in. Mohawk's tufted carpet instructions say the floor and room must be held between 65°F and 85°F, with humidity between 30% and 65%, for at least 48 hours before and during installation, with the HVAC running.
The same instructions make a power stretcher mandatory, and they warn that failing to apply the proper stretch is likely to result in wrinkles and a restretch.
Old carpet
CRI 105: no carpet over existing carpet unless the manufacturer specifically recommends it.
Furniture and haul-away
CRI suggests settling who moves furniture, any extra moving fee, and who removes old carpet and cushion.
Stairs
CRI 105: treads, risers and noses clean, dry and structurally sound; tack strip on each tread.
Room conditions
Mohawk tufted carpet: 65°F to 85°F, 30% to 65% humidity, at least 48 hours before and during, HVAC running.
Sources: CRI 105 and CRI homeowner guidance; Mohawk tufted carpet installation instructions
How our carpet estimate works
You can buy carpet from us and have our crew install it, have us install carpet you bought elsewhere through our professional installation service, or buy it from us and install it yourself or hire your own crew. On every project we install, an experienced team leader supervises the work and keeps it inside the manufacturer's warranty guidelines.
If we supply both the carpet and the installation, the material is covered for 2 years and the installation for 2 years. If you supply the carpet and we install it, the material is covered for 1 year and the installation for 1 year from the installation date. Financing is available through Synchrony.
The cushion, the old carpet and the room itself all shape what your carpet job involves. To see what your rooms need, request a free estimate and we'll measure your home at no charge, or call (904) 443-9473.
Frequently asked questions
How much does it cost to install carpet in Jacksonville?
It depends on your rooms and what the job includes: the cushion your carpet's manufacturer requires, removing and disposing of the old carpet and cushion, and moving furniture. Instead of publishing per-square-foot prices, Mr. Wright Flooring gives you a free in-home measure and estimate. The Carpet and Rug Institute's residential standard, CRI 105, says correct measurements and a detailed diagram are essential before an installation can be professionally planned or estimated.
What carpet padding do I need?
The carpet manufacturer decides. CRI 105 requires the cushion to conform to the carpet maker's recommendations for the specific product and says not following them may void manufacturer warranties. As general limits, CRI 105 says residential cushion should not exceed 7/16 inch, while Mohawk's tufted carpet instructions call for cushion meeting FHA/HUD requirements, at least 5 pounds per cubic foot, and 3/8 inch to 1/2 inch thick; for berber-style carpet, Mohawk recommends at least 8 pounds per cubic foot and 1/4 inch to 3/8 inch. CRI recommends cushion for every carpet except direct glue-down.
Can new carpet be installed over old carpet?
Not under the Carpet and Rug Institute's standard. CRI 105 says that, unless the manufacturer specifically recommends otherwise, carpet should not be installed over existing carpet. That means the old carpet and cushion usually come out first. CRI suggests settling ahead of time who removes and disposes of the existing carpet and cushion, so ask about it during your estimate.
Do I need to move my own furniture before carpet is installed?
It's one of the questions the Carpet and Rug Institute suggests settling before installation. CRI's advice for homeowners asks who is responsible for moving the furniture and, if the installer does it, whether the company charges an extra moving fee. Raise it during your estimate so you know what to expect before installation day.
Does carpet need a moisture test on a concrete slab?
Usually not for stretch-in carpet in a home. CRI 105 says most residential stretch-in installations do not require moisture testing, which is different from Mohawk's SolidTech vinyl and laminated wood floors, where Mohawk's instructions set moisture limits for a slab. Carpet still has room requirements: Mohawk's tufted carpet instructions call for 65°F to 85°F and 30% to 65% humidity for at least 48 hours before and during installation, with the HVAC running.
What warranty comes with carpet installation?
It depends on who supplies the carpet. If Mr. Wright Flooring supplies both the carpet and the installation, the material is covered for 2 years and the installation for 2 years. If you supply the carpet and we install it, the material is covered for 1 year and the installation for 1 year from the installation date. On every project we install, an experienced team leader keeps the work inside the manufacturer's warranty guidelines.

Thinking about new floors?
The same crew, still family-owned. Free in-home estimate across Jacksonville and Northeast Florida.
