Mr. Wright Flooring Inc. logo
Flooring Cost Guide for Jacksonville: What Shapes Your Quote

Laminate Installation Cost: What Shapes Your Quote

Laminate installation cost depends on removal, a flat floor, slab moisture tests, moisture barriers and T-moldings. Here is what Mohawk and Pergo require.

Mr. Wright Flooring · Nov 18, 2026

Gloved installer using a drill beside light plank flooring

Laminate installation cost depends on the laminate you choose and on what has to happen before it goes down: removing carpet or other flooring, flattening the subfloor, testing a concrete slab and laying a moisture barrier, and adding T-moldings at doorways and in large rooms. Instead of publishing per-square-foot prices, Mr. Wright Flooring gives you a free in-home measure and estimate, and this guide explains what Mohawk and Pergo say shapes the job.

We're a family-owned flooring company in Jacksonville, serving Northeast Florida since 2012, and an authorized Mohawk retailer. The rules below come from Mohawk's laminated wood installation instructions and from Pergo, a Mohawk brand we carry, and each product's own instructions govern. This guide is part of our flooring cost guide. Still comparing floors? See laminate vs. vinyl plank flooring, or browse our laminate options.

What comes out before laminate goes in

Mohawk's laminated wood instructions tell the installer to remove carpet and padding, and any wood flooring installed on concrete. They also say not to remove products unless they are asbestos-free.

Where the old floor has to come up, ask how your estimate handles taking it up and hauling it away.

A flat, solid floor

Mohawk permits no more than 3/16 inch of unevenness per 10-foot span. If the floor is outside that, its instructions say to fill depressions with leveling compound and remove bumps and peaks in the subfloor.

Bedroom with a dark wood-look floor

Pergo's FAQ says Pergo flooring can be installed in any room inside the house where the floor is solid and flat. It also says Pergo should not go in rooms with sump pumps or floor drains.

Key takeaway

Leveling a subfloor that is out of flat comes before the planks, and some rooms, like those with floor drains, are off the list for Pergo.

Concrete slabs: moisture tests and barriers

Laminate over concrete starts with a moisture test. Mohawk's laminated wood instructions say concrete subfloors must be tested, with acceptable results at the time of installation recorded and documented. The limits are 4.0% moisture content or less with a meter calibrated for concrete (ASTM F2659), 5 pounds or less per 1,000 square feet per 24 hours on a calcium chloride test (ASTM F1869), or 80% relative humidity or less with in-slab probes (ASTM F2170). If any result is outside those requirements, the flooring should not be installed until the slab is within range.

Pergo's FAQ gives its own numbers. The concrete must be fully set, with no more than 5 pounds per 1,000 square feet per 24 hours on a calcium chloride test, or less than 80% RH with an in-situ probe. Above those levels, Pergo says its flooring is not recommended. Both are tighter than the limits Mohawk sets for its SolidTech vinyl, which our LVP installation cost guide covers.

Both sources call for a moisture barrier on concrete, worded differently. Pergo says a 6-mil polyethylene moisture barrier, overlapped at least 8 inches and taped, is required on all concrete installations. For flooring without attached underlayment, Mohawk's laminated wood instructions call for a polyethylene vapor barrier or Performance Accessories MoistureBarrier with seams overlapped 8 inches or more, then a single layer of underlayment. If that underlayment has a fully attached moisture barrier, Mohawk says no separate polyethylene barrier is needed. Over a wood subfloor, Mohawk calls for a single layer of underlayment. Our laminate flooring underlayment guide explains the options.

Key takeaway

On a slab, the moisture test result and the moisture barrier are both part of a laminate job, and each manufacturer sets its own limits.

Laminate over concrete: slab limits and moisture barriers, as Mohawk and Pergo each state them
RequirementMohawk laminated wood instructionsPergo FAQ
Calcium chloride test5 lb or less per 1,000 sq ft per 24 hours (ASTM F1869)No more than 5 lb per 1,000 sq ft per 24 hours
In-slab relative humidity80% or less (ASTM F2170)Less than 80% RH with an in-situ probe
Moisture meter4.0% or less, meter calibrated for concrete (ASTM F2659)Not covered in this guide
Testing and resultsRecorded and documented at time of installation; outside range, do not install until within range.Concrete fully set; above these levels, flooring not recommended.
Moisture barrier on concretePolyethylene or MoistureBarrier, seams overlapped 8 in. or more; skip it only if a separately added underlayment has a fully attached moisture barrier.6-mil polyethylene, overlapped at least 8 inches and taped, required on all concrete installations.

Sources: Mohawk laminated wood installation instructions; Pergo FAQ

Doorways, large rooms and sealed edges

Mohawk's laminated wood instructions describe the product as a floating floor, and that brings T-moldings into the job. Mohawk requires them in doorways narrower than 32 inches, wherever the installation changes direction through a doorway (whatever its size), and in rooms 50 feet or larger in length or width.

Room with a glass-paned door and a light plank floor

Mohawk also says that for full Wet Warranty coverage, the perimeter of the floor and all transitions have to be sealed. Wet Warranty is Mohawk's own name for that coverage. To see how water warranties differ from one floor to another, read waterproof vs. water-resistant flooring.

Mohawk laminated wood: where T-moldings and sealing apply

Narrow doorways

T-moldings required in doorways narrower than 32 inches.

Direction changes

T-moldings required wherever the installation changes direction through a doorway, whatever its size.

Large rooms

T-moldings required in rooms 50 feet or larger in length or width.

Full Wet Warranty coverage

Perimeter of the floor and all transitions must be sealed. Wet Warranty is Mohawk's own term.

Source: Mohawk laminated wood installation instructions

Does laminate need to acclimate?

Sometimes. Mohawk's laminated wood instructions say no on-site acclimation is required if the flooring is delivered at a moisture content and temperature that match normal living conditions, and those conditions are kept. Otherwise, Mohawk calls for 48 hours at 60°F to 85°F with relative humidity between 35% and 65%. Pergo's FAQ says to acclimate as the installation instructions recommend, noting that not all floors require it.

How our laminate estimate works

You can buy laminate from us and have our crew install it, have us install flooring you bought elsewhere through our professional installation service, or buy it from us and install it yourself or hire your own crew. On every project we install, an experienced team leader supervises the work and keeps it inside the manufacturer's warranty guidelines.

If we supply both the material and the installation, the material is covered for 2 years and the installation for 2 years. If you supply the material and we install it, the material is covered for 1 year and the installation for 1 year from the installation date. Financing is available through Synchrony.

Removal, a flat floor, the slab and the trim all shape what a laminate job involves. To see what your rooms need, request a free estimate and we'll measure your home at no charge, or call (904) 443-9473.

Frequently asked questions

How much does it cost to install laminate in Jacksonville?

It depends on your rooms and what the job needs: removing carpet or other flooring, leveling a subfloor that is out of flat, moisture testing and a moisture barrier on a concrete slab, underlayment, and T-moldings at doorways and in large rooms. Instead of publishing per-square-foot prices, Mr. Wright Flooring gives you a free in-home measure and estimate based on your rooms and the laminate you choose.

Does laminate need a moisture barrier over concrete?

Yes, under both Mohawk's and Pergo's guidance, though they word it differently. Pergo's FAQ says a 6-mil polyethylene moisture barrier, overlapped at least 8 inches and taped, is required on all concrete installations. Mohawk's laminated wood instructions call for a polyethylene vapor barrier or MoistureBarrier with seams overlapped 8 inches or more under the underlayment, unless the underlayment has a fully attached moisture barrier.

Can laminate go over carpet?

No, according to Mohawk's laminated wood instructions, which tell the installer to remove carpet and padding before installation. They also call for removing any wood flooring installed on concrete, and they say not to remove products unless they are asbestos-free. Ask how your estimate handles taking up and hauling away the old floor.

When does laminate need T-moldings?

Mohawk's laminated wood instructions describe the product as a floating floor that requires T-moldings in doorways narrower than 32 inches, wherever the installation changes direction through a doorway regardless of its size, and in rooms 50 feet or larger in length or width. Mohawk also says that for full Wet Warranty coverage, the perimeter of the floor and all transitions have to be sealed.

Can laminate go in a room with a floor drain?

Not Pergo. Pergo's FAQ says its flooring should not be installed in rooms with sump pumps or floor drains. It says Pergo can go in any room inside the house where the floor is solid and flat. For other laminate products, check that product's own installation instructions, since each manufacturer sets its own rules.

What warranty comes with laminate installation?

It depends on who supplies the laminate. If Mr. Wright Flooring supplies both the material and the installation, the material is covered for 2 years and the installation for 2 years. If you supply the material and we install it, the material is covered for 1 year and the installation for 1 year from the installation date. On every project we install, an experienced team leader keeps the work inside the manufacturer's warranty guidelines.

Thinking about new floors?

The same crew, still family-owned. Free in-home estimate across Jacksonville and Northeast Florida.