Flooring Cost Guide for Jacksonville: What Shapes Your Quote
What does flooring cost in Jacksonville? It depends on the floor you pick and what your house needs first. Here is what shapes a quote for carpet, LVP, laminate and tile.
Mr. Wright Flooring · Nov 18, 2026

What does flooring cost in Jacksonville? It depends on the floor you choose and on what your house needs before that floor can go down, and that second part changes from one home to the next. Instead of publishing per-square-foot prices, Mr. Wright Flooring gives you a free in-home measure and estimate for your rooms and the floor you pick.
We're a family-owned flooring company in Jacksonville, serving Northeast Florida since 2012. We're an authorized Mohawk retailer, an NWFA member and CFI Certified. This guide walks through what shapes a quote for carpet, luxury vinyl plank, laminate and tile, with a full guide for each one. Where a rule comes from a manufacturer or a trade group, we name the source, because the requirements change from one product to the next.
Why every estimate starts with a measurement
The Carpet and Rug Institute's residential installation standard, CRI 105, says correct measurements and a detailed diagram are essential before an installation can be professionally planned, estimated or completed. That standard is written for carpet. We offer free estimates and in-home measures for every floor, so you don't need your own numbers before you call. If you'd like a rough square footage first, our guide on how to measure for flooring shows you how.
The subfloor matters too. The National Wood Flooring Association (NWFA) says moisture tests on a concrete subfloor tell an installer whether to start a job at all, and which products and systems the floor will need. Its 2025 wood flooring installation guidelines call for moisture testing on every flooring job, even when the adhesive maker says no test is required, and for documenting the results.
Key takeaway
A useful estimate is built on your rooms' measurements and your subfloor's condition, not only on the floor you pick.
What changes the scope of almost any flooring job
This guide looks at four things from the manufacturer and trade-group guidance behind it: how flat the subfloor is, how much moisture is in a concrete slab, what is on the floor now, and who handles the furniture and the old flooring.

How flat the subfloor is
Flooring makers and trade groups set flatness limits, and a floor outside them needs work before the new floor goes down. For wood floors over concrete, the NWFA says the slab should be flat to within 1/8 inch over 6 feet, or 3/16 inch over 10 feet, unless the wood flooring manufacturer says otherwise. A slab outside that range has to be flattened by grinding high spots, filling low spots or both. Mohawk's SolidTech and laminated wood instructions carry their own limits, which our LVP and laminate cost guides cover.
Where one room meets another, the NWFA's wood flooring guidelines say subfloor flatness should stay in tolerance. If adjoining rooms are out of tolerance, sit on a separate plane or meet a ramp, it says a specialty or customized transition is needed between the floors.
Moisture in a concrete slab
If your home sits on a slab, Mohawk's hard-floor instructions set a moisture limit the concrete has to meet, and the limits differ even within Mohawk's own lines. Mohawk's SolidTech instructions allow up to 8 pounds per 1,000 square feet per 24 hours on a calcium chloride test, while its laminated wood instructions allow 5 pounds or less. Mohawk's SolidTech instructions put the final responsibility for deciding whether the concrete is dry enough on the floor covering installer.
The floor that's there now
Sometimes the old floor stays and sometimes it has to come up, and the answer depends on the new floor. For wood flooring, the NWFA says installing over existing floor coverings is not uncommon and is often necessary. Carpet is different: CRI 105 says that, unless the manufacturer specifically recommends otherwise, carpet should not be installed over existing carpet.
The age of the house can matter too. The NWFA notes that many tear-outs include removing linoleum, and that some of these floor coverings in homes built before 1986 could contain asbestos. Where asbestos or lead is present, the NWFA says disturbing the existing floor covering may not always be the best option. Mohawk's tufted carpet instructions say asbestos-containing floor tiles, adhesives and floor coverings require special preparation, handling and removal procedures.
Furniture and haul-away
CRI suggests settling a few practical questions before a carpet installation: who moves the furniture, whether there is an extra moving fee if the installer does it, and who removes and disposes of the old carpet and cushion. Those questions are worth asking about any floor, and your estimate is the place to answer them.
Key takeaway
Manufacturers and trade groups set rules for the subfloor, the slab and the old floor, so ask how your estimate handles each of them.
Flatness: NWFA, wood over concrete
Flat to 1/8 inch over 6 feet or 3/16 inch over 10 feet unless the manufacturer says otherwise.
Moisture in a concrete slab
Mohawk's limits differ by line, and SolidTech instructions put the dry-enough decision on the installer.
The floor that's there now
NWFA: wood over existing coverings is often necessary. CRI 105: no carpet over carpet unless manufacturer recommends.
Furniture and haul-away
CRI suggests settling who moves furniture, any extra moving fee, and who removes the old carpet and cushion.
Sources: NWFA wood flooring installation guidelines; Mohawk SolidTech and laminated wood instructions; CRI 105 and CRI homeowner guidance
Carpet installation: what drives the quote
With carpet, the cushion, the old carpet and any stairs shape the job. CRI 105 requires the cushion to conform to the carpet maker's recommendations for the specific product and warns that not following them may void manufacturer warranties. It also sets out added steps for stairs, including tack strip on each tread. Mohawk's tufted carpet instructions call for the room to stay between 65°F and 85°F, with humidity between 30% and 65%, for at least 48 hours before and during installation, with the HVAC running.
Read the full breakdown in our guide to carpet installation cost, and see our carpet padding guide for more on cushion.
LVP installation: what drives the quote
For luxury vinyl plank, much of the work happens under the floor. Mohawk's SolidTech instructions say any unevenness over 3/16 inch in 10 feet, or 1/8 inch in 6 feet, must be leveled, and that on a wood subfloor, an underlayment will not correct a subfloor that flexes or is uneven. Mohawk also says old adhesive has to be mechanically removed by a licensed professional contractor or covered with a portland cement-based self-leveling underlayment. Mohawk also requires the whole perimeter of a SolidTech floor to be sealed with its WetProtect molding system and 100% silicone sealant or PerimeterSeal.

Our guide to LVP installation cost covers slab testing, vapor barriers and trim in more detail.
Laminate installation: what drives the quote
Mohawk's laminated wood instructions start with removal: carpet and padding come out, along with any wood flooring installed on concrete. On a slab, the concrete has to be tested and acceptable results recorded at the time of installation, and a moisture barrier is part of the job, either a polyethylene sheet or, under planks without attached underlayment, an added underlayment with one fully attached. Mohawk also requires T-moldings in doorways narrower than 32 inches and in rooms 50 feet or larger in length or width. Pergo, a Mohawk brand we carry, requires a taped 6-mil polyethylene moisture barrier on all concrete installations.
Read more in our guide to laminate installation cost, and see laminate flooring underlayment for what goes beneath the planks.
Tile installation: what drives the quote
Tile depends on the floor underneath it. The Tile Council of North America (TCNA) says the traditional minimum floor rigidity for tile is L/360, meaning the floor should not deflect more than its span divided by 360, before the tile underlayment is installed. TCNA also says variations in the substrate affect lippage, the height difference between neighboring tiles. It recommends allowing for expansion and contraction in every tile installation, and it says crack isolation membranes do not remove the need for movement joints.
Our guide to tile installation cost covers slab curing, cracks and tiling over old tile, and our ceramic vs. porcelain tile guide helps you choose the tile itself.
| Floor | Under the floor | Other scope items | Source |
|---|---|---|---|
| Carpet | Cushion must conform to the carpet maker's recommendations for the specific product. | Temperature and humidity held for at least 48 hours before and during installation. | CRI 105; Mohawk tufted carpet instructions |
| LVP (SolidTech) | Unevenness over 3/16 inch in 10 feet, or 1/8 inch in 6 feet, must be leveled. | Old adhesive mechanically removed by a licensed contractor or covered with portland cement-based self-leveling underlayment; perimeter sealed with the WetProtect molding system and 100% silicone or PerimeterSeal. | Mohawk SolidTech instructions |
| Laminate | Slab tested and acceptable results recorded at installation; a polyethylene moisture barrier, or an added underlayment with one fully attached. Pergo: taped 6-mil polyethylene. | Carpet and padding removed; T-moldings in doorways narrower than 32 inches and in rooms 50 feet or larger in length or width. | Mohawk laminated wood instructions; Pergo |
| Tile | Minimum floor rigidity of L/360, the traditional standard, before tile underlayment is installed. | Allow for expansion and contraction in every installation; crack isolation membranes don't replace movement joints. | TCNA |
Sources: CRI 105; Mohawk tufted carpet, SolidTech and laminated wood instructions; Pergo; TCNA
How buying and installing works with us
You can buy your floor from us and have our crew install it, have us install flooring you bought elsewhere through our professional installation service, or buy the material from us and install it yourself or hire your own crew. On every project we install, an experienced team leader supervises the work and keeps it inside the manufacturer's warranty guidelines.
Our warranty depends on who supplies the material. If we supply both the material and the installation, the material is covered for 2 years and the installation for 2 years. If you supply the material and we install it, the material is covered for 1 year and the installation for 1 year from the installation date. Financing is available through Synchrony.
The cost of a new floor comes down to your rooms, your subfloor and the floor you choose. Request a free estimate and we will measure your home at no charge, or call (904) 443-9473 to set an appointment to browse the selections in our showroom. If you're still deciding on a floor, our guide to choosing your floor can help, and our installation and care guide covers what comes after.
Frequently asked questions
How much does it cost to install flooring in Jacksonville?
It depends on the floor you choose and on what your home needs before it goes down, such as leveling the subfloor, removing the old floor, a moisture barrier over a concrete slab, or transitions between rooms. Instead of publishing per-square-foot prices, Mr. Wright Flooring offers a free in-home measure and estimate based on your rooms and the floor you pick. The Carpet and Rug Institute's residential standard, CRI 105, says correct measurements and a detailed diagram are essential before an installation can be estimated.
What should a flooring estimate cover?
Start with accurate measurements of your rooms. Then ask how the estimate handles the subfloor, any concrete slab and the old floor, because manufacturers set rules for all three. The Carpet and Rug Institute also suggests settling who moves the furniture, whether there is an extra moving fee if the installer does it, and who removes and disposes of the old carpet and cushion. Those questions are worth asking about any floor.
Does the condition of my subfloor affect the cost of new flooring?
It can, because manufacturers and trade groups set flatness limits. For wood floors over concrete, the NWFA says the slab should be flat to within 1/8 inch over 6 feet or 3/16 inch over 10 feet, unless the wood flooring manufacturer specifies otherwise, and a slab outside that range has to be ground, filled or both. Mohawk's SolidTech instructions say unevenness beyond its limits must be leveled, and that on a wood subfloor, an underlayment will not correct a subfloor that flexes or is uneven.
Can new flooring go over my old floor?
It depends on the new floor. For wood flooring, the NWFA says installing over existing floor coverings is not uncommon and is often necessary. Mohawk says its SolidTech vinyl can go over most existing floor coverings, but not carpet, floating laminate, floating floor systems, luan or cushioned vinyl. CRI 105 says new carpet should not go over existing carpet unless the manufacturer recommends it. TCNA says new tile goes over old tile regularly where floor height allows and the old tile is well-bonded.
Does a concrete slab need a moisture test before new flooring?
For wood, LVP and laminate, yes under the guidance below. The NWFA's 2025 wood flooring guidelines call for moisture testing on every flooring job, even when the adhesive maker says it is not required. Mohawk's SolidTech and laminated wood instructions each set their own slab moisture limits, and the laminated wood limits are tighter. Carpet is different: CRI 105 says most residential stretch-in carpet installations do not require moisture testing.
What warranty comes with your installation?
It depends on who supplies the material. If Mr. Wright Flooring supplies both the material and the installation, the material is covered for 2 years and the installation for 2 years. If you supply the material and we install it, the material is covered for 1 year and the installation for 1 year from the installation date. Financing is also available through Synchrony.

Thinking about new floors?
The same crew, still family-owned. Free in-home estimate across Jacksonville and Northeast Florida.
